4929 Valve Spring Height Micrometer 1.600-2.200" Range Checker Gauge Tool For V8

Description

Fitments: for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
Easy & Convenient to Use: Install our 4929 Height Micrometer just like a valve spring, then expand the tool until it has seated the valve, locks and retainer.
4929 Valve Spring Height Micrometer 1.600-2.200" Range Checker Gauge Tool For V8
Fitments:
for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
Easy & Convenient to Use:
Install our 4929 Height Micrometer just like a valve spring, then expand the tool until it has seated the valve, locks and retainer.
Precise Reading:
Simulated installation allows ultra precise readings. This tool is read like a micrometer, accurate to .001". Its measuring height range is 1.600 inch-2.200 inch.
Easy to Install:
Step1. Simply install the height micrometer instead of a valve spring.
Step2. Rotate the clearly engraved dial to expand the tool to seat the valve.
Step3. Bind the valve spring coil , then locks and retainer.
Before installing the spring on the cylinder heads, check the installed spring height：
1. Install 1 intake and 1 exhaust valve.
2. Get the correct retainer for the spring and correct locks for the retainer. Pull the retainer tightly against the valve locks while holding the valve assembly steady.
3. Place height micrometer or a snap gauge and a pair of calipers on the valve between the spring seat and the outside step of the retainer and turn the height micrometer counterclockwise to establish valve spring height. After you have measured all the valves, find the shortest height. This will become the spring’s installed height on your heads.
4. Add shims until proper height is obtained on the remaining valves.
5. Take the height micrometer and retainer to valve spring tester and check valve spring load at that height.
IMPORTANT:
Since the retainer is installed in the spring when checking the spring loads, make certain that the thickness of the retainer is not included when calculating the installed height and is accounted for when compressing the spring. The spring load checker will show to be higher with the spring installed at the correct height.
Package Includes:
1 x Valve Spring Height Micrometer.
Item Specifics
Warranty
1 Year
Brand
Roadboost
Manufacturer Part Number
4929
Material
Stainless Steel
Type
Single Valve Spring
Fitment Type
Direct Replacement
Interchange Part Number
4929
Other Part Number
4929
Valve Type
Exhaust/ Intake
Lifter Type
Hydraulic Roller
Custom Bundle
No
Condition
New
Payment
We accept PayPal payment and other payments through PayPal.
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
We have CA, NJ  warehouses and ship items may vary according to the stock.
Returns
30 Days easy returns satisfaction grantee.
Items to be returned must be in original factory condition.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Feedback
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
4929 Valve Spring Height Micrometer 1.600-2.200" Range Checker Gauge Tool For V8
Fitments:
for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
Easy & Convenient to Use:
Install our 4929 Height Micrometer just like a valve spring, then expand the tool until it has seated the valve, locks and retainer.
Precise Reading:
Simulated installation allows ultra precise readings. This tool is read like a micrometer, accurate to .001". Its measuring height range is 1.600 inch-2.200 inch.
Easy to Install:
Step1. Simply install the height micrometer instead of a valve spring.
Step2. Rotate the clearly engraved dial to expand the tool to seat the valve.
Step3. Bind the valve spring coil , then locks and retainer.
Before installing the spring on the cylinder heads, check the installed spring height：
1. Install 1 intake and 1 exhaust valve.
2. Get the correct retainer for the spring and correct locks for the retainer. Pull the retainer tightly against the valve locks while holding the valve assembly steady.
3. Place height micrometer or a snap gauge and a pair of calipers on the valve between the spring seat and the outside step of the retainer and turn the height micrometer counterclockwise to establish valve spring height. After you have measured all the valves, find the shortest height. This will become the spring’s installed height on your heads.
4. Add shims until proper height is obtained on the remaining valves.
5. Take the height micrometer and retainer to valve spring tester and check valve spring load at that height.
IMPORTANT:
Since the retainer is installed in the spring when checking the spring loads, make certain that the thickness of the retainer is not included when calculating the installed height and is accounted for when compressing the spring. The spring load checker will show to be higher with the spring installed at the correct height.
Package Includes:
1 x Valve Spring Height Micrometer.
Payment
We accept PayPal payment and other payments through PayPal.
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
We have CA, NJ  warehouses and ship items may vary according to the stock.
Returns
30 Days easy returns satisfaction grantee.
Items to be returned must be in original factory condition.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Feedback
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
All rights reserved.